Krypton® Multi Calibration Menu

Navigate to the calibration menu on your analyzer prior to starting the calibration process.

Helpful articles: How to Clean and Calibrate your Zirkon® DIS Sensor (Free Chlorine, Chlorine Dioxide, Ozone, Hydrogen Peroxide) & How to Clean and Calibrate your Zirkon® pH Sensor

An on-site calibration is needed for an accurate measurement. It is derived by a reference measurement, such as colorimetric DPD method.

Please use only photometric instruments.

To get to the Calibration Menu go to:

Main menu > Cal > Cal Dis or Cal pH (depending on which sensor you are ready to calibrate)