Save/Load Settings — Krypton® Multi / Krypton® DIS & DIS (Total) – Kuntze Instruments GmbH

Kuntze analyzers let you store configuration on an SD card for backup or to copy settings to another unit of the same type. This applies to Krypton® Multi, Krypton® DIS, and Krypton® DIS (Total) (same Memory workflow as DIS; instrument type must match when loading).

Overview

Topic	Krypton® Multi	Krypton® DIS / DIS (Total)
Typical SD access	SD in lid assembly (snap-on lid)	SD on rear (four corner screws, turn unit over)
Save path (symbols)	SAVE SETTINGS > OK	SAVE > SETTINGS > OK
Load path (symbols)	LOAD SETTINGS > OK	LOAD > SETTINGS > OK

You can restore settings after a replacement instrument, a firmware update, or after enabling add-ons. With a suitable PC tool you can edit settings files offline and load them via SD (same type restrictions apply).

Note: Settings may only be duplicated or loaded onto instruments of the same type (Multi → Multi; DIS → DIS; DIS Total → DIS Total).

Before you begin

Industry-standard SD card, maximum 2 GB, with free space.
Card installed in the analyzer before save.
For physical access: Multi — open lid; DIS / DIS (Total) — rear panel per maintenance articles.

Krypton® Multi — save and load

Save settings

Confirm the SD card is inserted and has free capacity.
Main menu > IN / OUT > MEMORY — select SAVE SETTINGS > OK.
The display shows the new filename (parameter and date). Confirm with OK.

Load settings

In MEMORY, select LOAD SETTINGS > OK.
Confirm the filename shown (parameter and date) with OK.
The instrument restarts; time is shown during startup.

Krypton® DIS / DIS (Total) — save and load

Save settings

Confirm the SD card is inserted and has free capacity.
Main menu > IN / OUT > MEMORY — select SAVE > SETTINGS > OK.
The display shows the new filename (parameter and date). Confirm with OK.

Load settings

In MEMORY, select LOAD > SETTINGS > OK.
Confirm the filename shown (parameter and date) with OK.
The instrument restarts; time is shown during startup.

Note: Load only files intended for the same parameter / instrument family.

Important notes

Do not mix settings files between Multi and DIS platforms.
After major changes (firmware, factory reset), reload a saved file only if it matches the new software and options enabled on the device.
Consider saving settings before firmware updates or service.

Krypton® Multi

Krypton® DIS / DIS (Total)